as vezes apetece...

NAPALM

Materials: Undissolvable (gasoline won't dissolve them) containers (Glass pilot jars, pop cans, and 1-gallon paint cans are your best bet), ample amount of gasoline, and compressed-sphere styrofoam (little spherical bits tend to flake off when it's broken).

Procedure:

1. Take your gasoline and fill the (we'll assume) jars approximately 3/4 of the way full (space must be allowed for foam dissovling and expansion)

2. Take styrofoam and break into pieces that fit in the jar, and begin to insert them into the gasoline, giving them time to dissolve completely.

3. Feed styrofoam until the mix becomes a very slick gel and absolutely refuses to eat anymore.

4. (This is the part which makes it higher quality than others) Allow the mixture to sit for 3-5 days, away from water or rain.

5. After mixture has set (i.e. hard layer on top, possible visible seperation of water and gel), take a rod or stick and jab a hole through the hard layer on top. Then drain all the water that has formed on the bottom, and now you have a good napalm mixture, though you may want to mix it a bit more to get it loosened and gelled again



o autor desde post não se responsabiliza por qualquer estupidez provocada pelos seus leitores ao tentarem indevidamente utilizar o conteudo aqui explanado, lembra que o que esta escrito é apenas uma metáfora e não pactua com qualquer dos usos historicos do produto em causa. informação retirada do google